132 lines
5.4 KiB
Django/Jinja
132 lines
5.4 KiB
Django/Jinja
;
|
|
; Asterisk Built-in mini-HTTP server
|
|
;
|
|
;
|
|
; Note about Asterisk documentation:
|
|
; If Asterisk was installed from a tarball, then the HTML documentation should
|
|
; be installed in the static-http/docs directory which is
|
|
; (/var/lib/asterisk/static-http/docs) on linux by default. If the Asterisk
|
|
; HTTP server is enabled in this file by setting the "enabled", "bindaddr",
|
|
; and "bindport" options, then you should be able to view the documentation
|
|
; remotely by browsing to:
|
|
; http://<server_ip>:<bindport>/static/docs/index.html
|
|
;
|
|
[general]
|
|
;
|
|
; The name of the server, advertised in both the Server field in HTTP
|
|
; response message headers, as well as the <address /> element in certain HTTP
|
|
; response message bodies. If not furnished here, "Asterisk/{version}" will be
|
|
; used as a default value for the Server header field and the <address />
|
|
; element. Setting this property to a blank value will result in the omission
|
|
; of the Server header field from HTTP response message headers and the
|
|
; <address /> element from HTTP response message bodies.
|
|
;
|
|
servername=Asterisk
|
|
;
|
|
; Whether HTTP/HTTPS interface is enabled or not. Default is no.
|
|
; This also affects manager/rawman/mxml access (see manager.conf)
|
|
;
|
|
enabled=yes
|
|
;
|
|
; Address to bind to, both for HTTP and HTTPS. You MUST specify
|
|
; a bindaddr in order for the HTTP server to run. There is no
|
|
; default value.
|
|
;
|
|
bindaddr=0.0.0.0
|
|
;
|
|
; Port to bind to for HTTP sessions (default is 8088)
|
|
;
|
|
;bindport=8088
|
|
;
|
|
; Prefix allows you to specify a prefix for all requests
|
|
; to the server. The default is blank. If uncommented
|
|
; all requests must begin with /asterisk
|
|
;
|
|
;prefix=asterisk
|
|
;
|
|
; sessionlimit specifies the maximum number of httpsessions that will be
|
|
; allowed to exist at any given time. (default: 100)
|
|
;
|
|
;sessionlimit=100
|
|
;
|
|
; session_inactivity specifies the number of milliseconds to wait for
|
|
; more data over the HTTP connection before closing it.
|
|
;
|
|
; Default: 30000
|
|
;session_inactivity=30000
|
|
;
|
|
; session_keep_alive specifies the number of milliseconds to wait for
|
|
; the next HTTP request over a persistent connection.
|
|
;
|
|
; Set to 0 to disable persistent HTTP connections.
|
|
; Default: 15000
|
|
;session_keep_alive=15000
|
|
;
|
|
; Whether Asterisk should serve static content from static-http
|
|
; Default is no.
|
|
;
|
|
enable_static=yes
|
|
;
|
|
; Whether Asterisk should serve a status page showing the running
|
|
; configuration of this built-in HTTP server.
|
|
; Default is yes.
|
|
;
|
|
;enable_status=no
|
|
;
|
|
; Redirect one URI to another. This is how you would set a
|
|
; default page.
|
|
; Syntax: redirect=<from here> <to there>
|
|
; For example, if you are using the Asterisk-gui,
|
|
; it is convenient to enable the following redirect:
|
|
;
|
|
;redirect = / /static/config/index.html
|
|
;
|
|
; HTTPS support. In addition to enabled=yes, you need to
|
|
; explicitly enable tls, define the port to use,
|
|
; and have a certificate somewhere.
|
|
;tlsenable=yes ; enable tls - default no.
|
|
;tlsbindaddr=0.0.0.0:8089 ; address and port to bind to - default is bindaddr and port 8089.
|
|
;
|
|
;tlscertfile=</path/to/certificate.pem> ; path to the certificate file (*.pem) only.
|
|
;tlsprivatekey=</path/to/private.pem> ; path to private key file (*.pem) only.
|
|
; If no path is given for tlscertfile or tlsprivatekey, default is to look in current
|
|
; directory. If no tlsprivatekey is given, default is to search tlscertfile for private key.
|
|
;
|
|
; To produce a certificate you can e.g. use openssl. This places both the cert and
|
|
; private in same .pem file.
|
|
; openssl req -new -x509 -days 365 -nodes -out /tmp/foo.pem -keyout /tmp/foo.pem
|
|
;
|
|
; tlscipher= ; The list of allowed ciphers
|
|
; ; if none are specified the following cipher
|
|
; ; list will be used instead:
|
|
; ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:
|
|
; ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:
|
|
; kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:
|
|
; ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:
|
|
; ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:
|
|
; DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:
|
|
; AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:
|
|
; AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:
|
|
; !EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA
|
|
;
|
|
; tlsdisablev1=yes ; Disable TLSv1 support - if not set this defaults to "yes"
|
|
; tlsdisablev11=yes ; Disable TLSv1.1 support - if not set this defaults to "no"
|
|
; tlsdisablev12=yes ; Disable TLSv1.2 support - if not set this defaults to "no"
|
|
;
|
|
; tlsservercipherorder=yes ; Use the server preference order instead of the client order
|
|
; ; Defaults to "yes"
|
|
;
|
|
; The post_mappings section maps URLs to real paths on the filesystem. If a
|
|
; POST is done from within an authenticated manager session to one of the
|
|
; configured POST mappings, then any files in the POST will be placed in the
|
|
; configured directory.
|
|
;
|
|
;[post_mappings]
|
|
;
|
|
; NOTE: You need a valid HTTP AMI mansession_id cookie with the manager
|
|
; config permission to POST files.
|
|
;
|
|
; In this example, if the prefix option is set to "asterisk", then using the
|
|
; POST URL: /asterisk/uploads will put files in /var/lib/asterisk/uploads/.
|
|
;uploads = /var/lib/asterisk/uploads/
|
|
;
|