66 lines
1.7 KiB
OpenSCAD
66 lines
1.7 KiB
OpenSCAD
$fn = 50;
|
|
|
|
include <pcb_mount.scad>;
|
|
|
|
MODE = "all"; // ["all", mounting_bracket", "case"]
|
|
TOLERANCE=0.5;
|
|
|
|
wall_width = 3;
|
|
side_padding = 10;
|
|
case_width = pcb_width + (wall_width * 2) + (TOLERANCE * 2) + (side_padding * 2);
|
|
case_depth = pcb_height + (wall_width * 2) + (TOLERANCE * 2);
|
|
bottom_height = 30;
|
|
pcb_spacing = 10;
|
|
pcb_thickness = 1.6;
|
|
|
|
inside_offset = [wall_width + TOLERANCE + side_padding,wall_width + TOLERANCE,wall_width];
|
|
|
|
module rounded_box(box, r) {
|
|
hull() {
|
|
cylinder(r=r,h=box.z);
|
|
translate([0,box.y])
|
|
cylinder(r=r,h=box.z);
|
|
translate([box.x,0])
|
|
cylinder(r=r,h=box.z);
|
|
translate([box.x, box.y])
|
|
cylinder(r=r,h=box.z);
|
|
}
|
|
}
|
|
|
|
module case() {
|
|
difference() {
|
|
rounded_box(box=[case_width, case_depth, bottom_height], r=wall_width);
|
|
translate([wall_width,wall_width,wall_width + 1])
|
|
rounded_box(box=[pcb_width + (TOLERANCE * 2) + (side_padding * 2),
|
|
pcb_height + (TOLERANCE * 2),
|
|
bottom_height],
|
|
r=wall_width);
|
|
translate(inside_offset - [0,0,wall_width + 0.5]) {
|
|
drill_hole_cutouts(h=pcb_spacing);
|
|
posts(w=wall_width, h=wall_width/2 + 0.5);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
if (MODE == "mounting_bracket") {
|
|
color("purple")
|
|
translate(inside_offset)
|
|
pcb_mount(w=wall_width,h=pcb_spacing);
|
|
} else if (MODE == "case" || MODE == "all") {
|
|
case();
|
|
if (MODE == "all") {
|
|
color("purple")
|
|
translate(inside_offset)
|
|
pcb_mount(w=wall_width,h=pcb_spacing);
|
|
|
|
color("green", 0.5)
|
|
translate(inside_offset + [0,0,pcb_spacing]) {
|
|
difference() {
|
|
cube([pcb_width, pcb_height, pcb_thickness]);
|
|
translate([0,0,-0.5])
|
|
drill_hole_cutouts(h=pcb_thickness + 1);
|
|
}
|
|
}
|
|
}
|
|
}
|