correlr/openscad
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

[project_box] Add lid

Browse source
This commit is contained in:
Correl Roush 2022-12-06 16:19:45 -05:00
parent 7cd13f0eb2
commit 635e1a98ae
2 changed files with 77 additions and 42 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
fit_test.scad
View file

@ -1,6 +1,9 @@
use <project_box.scad>
$fn=50;
mode = "case"; // ["case", "lid", "all"]
project_box(50, 70,
above=0,
below=1);
below=1,
mode=mode);

46
project_box.scad
View file

@ -1,12 +1,13 @@
/* Project box
A parametric box for electronics projects using perforated circuit boards. The
board is held above the bottom of the box by four corner supports, and snaps
into place to hold it snugly while allowing easy removal.
A parametric box for electronics projects using perforated circuit boards. The
board is held above the bottom of the box by four corner supports, and snaps
into place to hold it snugly while allowing easy removal.
*/
$fn=50;
mode = "case"; // ["case", "lid", "all"]
board_x = 50;
board_y = 70;
board_thickness = 1; // [1:10]
@ -58,6 +59,21 @@ module lid_base(x, y, z, slot_depth=1.5) {
[7,4,0,3]]);
}
module lid(x, y, z, slot_depth=1.5, wall_width=3, fit_tolerance=0.5) {
indent_width = x / 4;
difference() {
union() {
lid_base(x, y, z, slot_depth);
translate([x / 2 - indent_width / 2 - fit_tolerance, y - wall_width - fit_tolerance, 0])
rotate([0, 90, 0])
cylinder(h=x / 4, r=2*fit_tolerance);
}
translate([x / 2 - indent_width / 2 - fit_tolerance, y - wall_width - fit_tolerance, z])
rotate([0, 90, 0])
cylinder(h=x / 4, r=2*fit_tolerance);
}
}
module project_box(x, y,
above=20,
below=10,
@ -65,7 +81,8 @@ module project_box(x, y,
fit_tolerance=0.5,
corner_radius=3,
support_radius=5,
wall_width=3) {
wall_width=3,
mode="case") {
width=board_x + (fit_tolerance * 2);
depth=board_y + (fit_tolerance * 2);
lid_width = width + wall_width; // Extends halfway into each side wall
@ -73,7 +90,20 @@ module project_box(x, y,
lid_height = wall_width; // Replaces most of the top wall
height=board_thickness + above + below + (fit_tolerance * 2) + lid_height;
// container
// lid
if (mode == "all") {
translate([wall_width / 2 + fit_tolerance, wall_width + fit_tolerance, height + wall_width + fit_tolerance]) {
lid(lid_width - (fit_tolerance * 2), lid_depth - (fit_tolerance * 2), lid_height - (fit_tolerance * 2));
}
} else if (mode == "lid") {
// Flip the lid and translate it into place for printing
translate([lid_width - (fit_tolerance * 2),0,lid_height - (fit_tolerance * 2)])
rotate([0, 180, 0])
lid(lid_width - (fit_tolerance * 2), lid_depth - (fit_tolerance * 2), lid_height - (fit_tolerance * 2));
}
// case
if ((mode == "case") || (mode == "all")) {
difference() {
_rounded_box(h=height + (wall_width * 2),
w=width + (wall_width * 2),
@ -105,7 +135,7 @@ module project_box(x, y,
// locking nubs
translate([wall_width,wall_width,wall_width]) {
nub_size = 1;
nub_size = fit_tolerance * 2;
nub_width = board_y / 4;
nub_height = below + board_thickness + (nub_size/2) + (fit_tolerance*2);
translate([0,board_y / 2 - nub_width / 2,nub_height])
@ -115,6 +145,7 @@ module project_box(x, y,
rotate([270,0,0])
cylinder(h=nub_width, r=nub_size/2);
}
}
}
project_box(board_x, board_y,
@ -124,4 +155,5 @@ project_box(board_x, board_y,
fit_tolerance=fit_tolerance,
corner_radius=corner_radius,
support_radius=support_radius,
wall_width=wall_width);
wall_width=wall_width,
mode=mode);