diff --git a/config/exercise_readme.go.tmpl b/config/exercise_readme.go.tmpl
new file mode 100644
index 0000000..2b26f49
--- /dev/null
+++ b/config/exercise_readme.go.tmpl
@@ -0,0 +1,16 @@
+# {{ .Spec.Name }}
+
+{{ .Spec.Description -}}
+{{- with .Hints }}
+{{ . }}
+{{ end }}
+{{- with .TrackInsert }}
+{{ . }}
+{{ end }}
+{{- with .Spec.Credits -}}
+## Source
+
+{{ . }}
+{{ end }}
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/accumulate/README.md b/exercises/accumulate/README.md
new file mode 100644
index 0000000..582e21a
--- /dev/null
+++ b/exercises/accumulate/README.md
@@ -0,0 +1,65 @@
+# Accumulate
+
+Implement the `accumulate` operation, which, given a collection and an
+operation to perform on each element of the collection, returns a new
+collection containing the result of applying that operation to each element of
+the input collection.
+
+Given the collection of numbers:
+
+- 1, 2, 3, 4, 5
+
+And the operation:
+
+- square a number (`x => x * x`)
+
+Your code should be able to produce the collection of squares:
+
+- 1, 4, 9, 16, 25
+
+Check out the test suite to see the expected function signature.
+
+## Restrictions
+
+Keep your hands off that collect/map/fmap/whatchamacallit functionality
+provided by your standard library!
+Solve this one yourself using other basic tools instead.
+
+Lisp specific: it's perfectly fine to use `MAPCAR` or the equivalent,
+as this is idiomatic Lisp, not a library function.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Conversation with James Edward Gray II [https://twitter.com/jeg2](https://twitter.com/jeg2)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/allergies/README.md b/exercises/allergies/README.md
new file mode 100644
index 0000000..7bd8616
--- /dev/null
+++ b/exercises/allergies/README.md
@@ -0,0 +1,67 @@
+# Allergies
+
+Given a person's allergy score, determine whether or not they're allergic to a given item, and their full list of allergies.
+
+An allergy test produces a single numeric score which contains the
+information about all the allergies the person has (that they were
+tested for).
+
+The list of items (and their value) that were tested are:
+
+* eggs (1)
+* peanuts (2)
+* shellfish (4)
+* strawberries (8)
+* tomatoes (16)
+* chocolate (32)
+* pollen (64)
+* cats (128)
+
+So if Tom is allergic to peanuts and chocolate, he gets a score of 34.
+
+Now, given just that score of 34, your program should be able to say:
+
+- Whether Tom is allergic to any one of those allergens listed above.
+- All the allergens Tom is allergic to.
+
+Note: a given score may include allergens **not** listed above (i.e.
+allergens that score 256, 512, 1024, etc.).  Your program should
+ignore those components of the score.  For example, if the allergy
+score is 257, your program should only report the eggs (1) allergy.
+
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Jumpstart Lab Warm-up [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/anagram/README.md b/exercises/anagram/README.md
new file mode 100644
index 0000000..371718f
--- /dev/null
+++ b/exercises/anagram/README.md
@@ -0,0 +1,43 @@
+# Anagram
+
+Given a word and a list of possible anagrams, select the correct sublist.
+
+Given `"listen"` and a list of candidates like `"enlists" "google"
+"inlets" "banana"` the program should return a list containing
+`"inlets"`.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Inspired by the Extreme Startup game [https://github.com/rchatley/extreme_startup](https://github.com/rchatley/extreme_startup)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/atbash-cipher/README.md b/exercises/atbash-cipher/README.md
new file mode 100644
index 0000000..5e9158a
--- /dev/null
+++ b/exercises/atbash-cipher/README.md
@@ -0,0 +1,64 @@
+# Atbash Cipher
+
+Create an implementation of the atbash cipher, an ancient encryption system created in the Middle East.
+
+The Atbash cipher is a simple substitution cipher that relies on
+transposing all the letters in the alphabet such that the resulting
+alphabet is backwards. The first letter is replaced with the last
+letter, the second with the second-last, and so on.
+
+An Atbash cipher for the Latin alphabet would be as follows:
+
+```plain
+Plain:  abcdefghijklmnopqrstuvwxyz
+Cipher: zyxwvutsrqponmlkjihgfedcba
+```
+
+It is a very weak cipher because it only has one possible key, and it is
+a simple monoalphabetic substitution cipher. However, this may not have
+been an issue in the cipher's time.
+
+Ciphertext is written out in groups of fixed length, the traditional group size
+being 5 letters, and punctuation is excluded. This is to make it harder to guess
+things based on word boundaries.
+
+## Examples
+- Encoding `test` gives `gvhg`
+- Decoding `gvhg` gives `test`
+- Decoding `gsvjf rxpyi ldmul cqfnk hlevi gsvoz abwlt` gives `thequickbrownfoxjumpsoverthelazydog`
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Wikipedia [http://en.wikipedia.org/wiki/Atbash](http://en.wikipedia.org/wiki/Atbash)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/bob/README.md b/exercises/bob/README.md
new file mode 100644
index 0000000..e3c5a08
--- /dev/null
+++ b/exercises/bob/README.md
@@ -0,0 +1,48 @@
+# Bob
+
+Bob is a lackadaisical teenager. In conversation, his responses are very limited.
+
+Bob answers 'Sure.' if you ask him a question.
+
+He answers 'Whoa, chill out!' if you yell at him.
+
+He says 'Fine. Be that way!' if you address him without actually saying
+anything.
+
+He answers 'Whatever.' to anything else.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Inspired by the 'Deaf Grandma' exercise in Chris Pine's Learn to Program tutorial. [http://pine.fm/LearnToProgram/?Chapter=06](http://pine.fm/LearnToProgram/?Chapter=06)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/difference-of-squares/README.md b/exercises/difference-of-squares/README.md
new file mode 100644
index 0000000..a2902b8
--- /dev/null
+++ b/exercises/difference-of-squares/README.md
@@ -0,0 +1,49 @@
+# Difference Of Squares
+
+Find the difference between the square of the sum and the sum of the squares of the first N natural numbers.
+
+The square of the sum of the first ten natural numbers is
+(1 + 2 + ... + 10)² = 55² = 3025.
+
+The sum of the squares of the first ten natural numbers is
+1² + 2² + ... + 10² = 385.
+
+Hence the difference between the square of the sum of the first
+ten natural numbers and the sum of the squares of the first ten
+natural numbers is 3025 - 385 = 2640.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Problem 6 at Project Euler [http://projecteuler.net/problem=6](http://projecteuler.net/problem=6)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/etl/README.md b/exercises/etl/README.md
new file mode 100644
index 0000000..58c82b5
--- /dev/null
+++ b/exercises/etl/README.md
@@ -0,0 +1,81 @@
+# Etl
+
+We are going to do the `Transform` step of an Extract-Transform-Load.
+
+### ETL
+Extract-Transform-Load (ETL) is a fancy way of saying, "We have some crufty, legacy data over in this system, and now we need it in this shiny new system over here, so
+we're going to migrate this."
+
+(Typically, this is followed by, "We're only going to need to run this
+once." That's then typically followed by much forehead slapping and
+moaning about how stupid we could possibly be.)
+
+### The goal
+We're going to extract some scrabble scores from a legacy system.
+
+The old system stored a list of letters per score:
+
+- 1 point: "A", "E", "I", "O", "U", "L", "N", "R", "S", "T",
+- 2 points: "D", "G",
+- 3 points: "B", "C", "M", "P",
+- 4 points: "F", "H", "V", "W", "Y",
+- 5 points: "K",
+- 8 points: "J", "X",
+- 10 points: "Q", "Z",
+
+The shiny new scrabble system instead stores the score per letter, which
+makes it much faster and easier to calculate the score for a word. It
+also stores the letters in lower-case regardless of the case of the
+input letters:
+
+- "a" is worth 1 point.
+- "b" is worth 3 points.
+- "c" is worth 3 points.
+- "d" is worth 2 points.
+- Etc.
+
+Your mission, should you choose to accept it, is to transform the legacy data
+format to the shiny new format.
+
+### Notes
+
+A final note about scoring, Scrabble is played around the world in a
+variety of languages, each with its own unique scoring table. For
+example, an "E" is scored at 2 in the Māori-language version of the
+game while being scored at 4 in the Hawaiian-language version.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+The Jumpstart Lab team [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/gigasecond/README.md b/exercises/gigasecond/README.md
new file mode 100644
index 0000000..6a006fd
--- /dev/null
+++ b/exercises/gigasecond/README.md
@@ -0,0 +1,41 @@
+# Gigasecond
+
+Calculate the moment when someone has lived for 10^9 seconds.
+
+A gigasecond is 10^9 (1,000,000,000) seconds.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Chapter 9 in Chris Pine's online Learn to Program tutorial. [http://pine.fm/LearnToProgram/?Chapter=09](http://pine.fm/LearnToProgram/?Chapter=09)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/grade-school/README.md b/exercises/grade-school/README.md
new file mode 100644
index 0000000..fa6dc10
--- /dev/null
+++ b/exercises/grade-school/README.md
@@ -0,0 +1,72 @@
+# Grade School
+
+Given students' names along with the grade that they are in, create a roster
+for the school.
+
+In the end, you should be able to:
+
+- Add a student's name to the roster for a grade
+  - "Add Jim to grade 2."
+  - "OK."
+- Get a list of all students enrolled in a grade
+  - "Which students are in grade 2?"
+  - "We've only got Jim just now."
+- Get a sorted list of all students in all grades.  Grades should sort
+  as 1, 2, 3, etc., and students within a grade should be sorted
+  alphabetically by name.
+  - "Who all is enrolled in school right now?"
+  - "Grade 1: Anna, Barb, and Charlie. Grade 2: Alex, Peter, and Zoe.
+    Grade 3…"
+
+Note that all our students only have one name.  (It's a small town, what
+do you want?)
+
+
+## For bonus points
+
+Did you get the tests passing and the code clean? If you want to, these
+are some additional things you could try:
+
+- If you're working in a language with mutable data structures and your
+  implementation allows outside code to mutate the school's internal DB
+  directly, see if you can prevent this. Feel free to introduce additional
+  tests.
+
+Then please share your thoughts in a comment on the submission. Did this
+experiment make the code better? Worse? Did you learn anything from it?
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+A pairing session with Phil Battos at gSchool [http://gschool.it](http://gschool.it)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/grains/README.md b/exercises/grains/README.md
new file mode 100644
index 0000000..904dd4b
--- /dev/null
+++ b/exercises/grains/README.md
@@ -0,0 +1,64 @@
+# Grains
+
+Calculate the number of grains of wheat on a chessboard given that the number
+on each square doubles.
+
+There once was a wise servant who saved the life of a prince. The king
+promised to pay whatever the servant could dream up. Knowing that the
+king loved chess, the servant told the king he would like to have grains
+of wheat. One grain on the first square of a chess board. Two grains on
+the next. Four on the third, and so on.
+
+There are 64 squares on a chessboard.
+
+Write code that shows:
+- how many grains were on each square, and
+- the total number of grains
+
+
+## For bonus points
+
+Did you get the tests passing and the code clean? If you want to, these
+are some additional things you could try:
+
+- Optimize for speed.
+- Optimize for readability.
+
+Then please share your thoughts in a comment on the submission. Did this
+experiment make the code better? Worse? Did you learn anything from it?
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+JavaRanch Cattle Drive, exercise 6 [http://www.javaranch.com/grains.jsp](http://www.javaranch.com/grains.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/hamming/README.md b/exercises/hamming/README.md
new file mode 100644
index 0000000..aee3642
--- /dev/null
+++ b/exercises/hamming/README.md
@@ -0,0 +1,72 @@
+# Hamming
+
+Calculate the Hamming difference between two DNA strands.
+
+A mutation is simply a mistake that occurs during the creation or
+copying of a nucleic acid, in particular DNA. Because nucleic acids are
+vital to cellular functions, mutations tend to cause a ripple effect
+throughout the cell. Although mutations are technically mistakes, a very
+rare mutation may equip the cell with a beneficial attribute. In fact,
+the macro effects of evolution are attributable by the accumulated
+result of beneficial microscopic mutations over many generations.
+
+The simplest and most common type of nucleic acid mutation is a point
+mutation, which replaces one base with another at a single nucleotide.
+
+By counting the number of differences between two homologous DNA strands
+taken from different genomes with a common ancestor, we get a measure of
+the minimum number of point mutations that could have occurred on the
+evolutionary path between the two strands.
+
+This is called the 'Hamming distance'.
+
+It is found by comparing two DNA strands and counting how many of the
+nucleotides are different from their equivalent in the other string.
+
+    GAGCCTACTAACGGGAT
+    CATCGTAATGACGGCCT
+    ^ ^ ^  ^ ^    ^^
+
+The Hamming distance between these two DNA strands is 7.
+
+# Implementation notes
+
+The Hamming distance is only defined for sequences of equal length. This means
+that based on the definition, each language could deal with getting sequences
+of equal length differently.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+The Calculating Point Mutations problem at Rosalind [http://rosalind.info/problems/hamm/](http://rosalind.info/problems/hamm/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/hello-world/README.md b/exercises/hello-world/README.md
new file mode 100644
index 0000000..d1fe144
--- /dev/null
+++ b/exercises/hello-world/README.md
@@ -0,0 +1,51 @@
+# Hello World
+
+The classical introductory exercise. Just say "Hello, World!".
+
+["Hello, World!"](http://en.wikipedia.org/wiki/%22Hello,_world!%22_program) is
+the traditional first program for beginning programming in a new language
+or environment.
+
+The objectives are simple:
+
+- Write a function that returns the string "Hello, World!".
+- Run the test suite and make sure that it succeeds.
+- Submit your solution and check it at the website.
+
+If everything goes well, you will be ready to fetch your first real exercise.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+This is an exercise to introduce users to using Exercism [http://en.wikipedia.org/wiki/%22Hello,_world!%22_program](http://en.wikipedia.org/wiki/%22Hello,_world!%22_program)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/largest-series-product/README.md b/exercises/largest-series-product/README.md
new file mode 100644
index 0000000..623bf2e
--- /dev/null
+++ b/exercises/largest-series-product/README.md
@@ -0,0 +1,50 @@
+# Largest Series Product
+
+Given a string of digits, calculate the largest product for a contiguous
+substring of digits of length n.
+
+For example, for the input `'1027839564'`, the largest product for a
+series of 3 digits is 270 (9 * 5 * 6), and the largest product for a
+series of 5 digits is 7560 (7 * 8 * 3 * 9 * 5).
+
+Note that these series are only required to occupy *adjacent positions*
+in the input; the digits need not be *numerically consecutive*.
+
+For the input `'73167176531330624919225119674426574742355349194934'`,
+the largest product for a series of 6 digits is 23520.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+A variation on Problem 8 at Project Euler [http://projecteuler.net/problem=8](http://projecteuler.net/problem=8)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/leap/README.md b/exercises/leap/README.md
new file mode 100644
index 0000000..f6516f7
--- /dev/null
+++ b/exercises/leap/README.md
@@ -0,0 +1,63 @@
+# Leap
+
+Given a year, report if it is a leap year.
+
+The tricky thing here is that a leap year in the Gregorian calendar occurs:
+
+```plain
+on every year that is evenly divisible by 4
+  except every year that is evenly divisible by 100
+    unless the year is also evenly divisible by 400
+```
+
+For example, 1997 is not a leap year, but 1996 is.  1900 is not a leap
+year, but 2000 is.
+
+If your language provides a method in the standard library that does
+this look-up, pretend it doesn't exist and implement it yourself.
+
+## Notes
+
+Though our exercise adopts some very simple rules, there is more to
+learn!
+
+For a delightful, four minute explanation of the whole leap year
+phenomenon, go watch [this youtube video][video].
+
+[video]: http://www.youtube.com/watch?v=xX96xng7sAE
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+JavaRanch Cattle Drive, exercise 3 [http://www.javaranch.com/leap.jsp](http://www.javaranch.com/leap.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/list-ops/README.md b/exercises/list-ops/README.md
new file mode 100644
index 0000000..c3f9926
--- /dev/null
+++ b/exercises/list-ops/README.md
@@ -0,0 +1,40 @@
+# List Ops
+
+Implement basic list operations.
+
+In functional languages list operations like `length`, `map`, and
+`reduce` are very common. Implement a series of basic list operations,
+without using existing functions.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/nucleotide-count/README.md b/exercises/nucleotide-count/README.md
new file mode 100644
index 0000000..fa1ae02
--- /dev/null
+++ b/exercises/nucleotide-count/README.md
@@ -0,0 +1,63 @@
+# Nucleotide Count
+
+Given a DNA string, compute how many times each nucleotide occurs in the string.
+
+DNA is represented by an alphabet of the following symbols: 'A', 'C',
+'G', and 'T'.
+
+Each symbol represents a nucleotide, which is a fancy name for the
+particular molecules that happen to make up a large part of DNA.
+
+Shortest intro to biochemistry EVAR:
+
+- twigs are to birds nests as
+- nucleotides are to DNA and RNA as
+- amino acids are to proteins as
+- sugar is to starch as
+- oh crap lipids
+
+I'm not going to talk about lipids because they're crazy complex.
+
+So back to nucleotides.
+
+DNA contains four types of them: adenine (`A`), cytosine (`C`), guanine
+(`G`), and thymine (`T`).
+
+RNA contains a slightly different set of nucleotides, but we don't care
+about that for now.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+The Calculating DNA Nucleotides_problem at Rosalind [http://rosalind.info/problems/dna/](http://rosalind.info/problems/dna/)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/pangram/README.md b/exercises/pangram/README.md
new file mode 100644
index 0000000..0e2b90a
--- /dev/null
+++ b/exercises/pangram/README.md
@@ -0,0 +1,45 @@
+# Pangram
+
+Determine if a sentence is a pangram. A pangram (Greek: παν γράμμα, pan gramma,
+"every letter") is a sentence using every letter of the alphabet at least once.
+The best known English pangram is: 
+> The quick brown fox jumps over the lazy dog.
+
+The alphabet used consists of ASCII letters `a` to `z`, inclusive, and is case
+insensitive. Input will not contain non-ASCII symbols.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Wikipedia [https://en.wikipedia.org/wiki/Pangram](https://en.wikipedia.org/wiki/Pangram)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/phone-number/README.md b/exercises/phone-number/README.md
new file mode 100644
index 0000000..89bc001
--- /dev/null
+++ b/exercises/phone-number/README.md
@@ -0,0 +1,64 @@
+# Phone Number
+
+Clean up user-entered phone numbers so that they can be sent SMS messages.
+
+The **North American Numbering Plan (NANP)** is a telephone numbering system used by many countries in North America like the United States, Canada or Bermuda. All NANP-countries share the same international country code: `1`.
+
+NANP numbers are ten-digit numbers consisting of a three-digit Numbering Plan Area code, commonly known as *area code*, followed by a seven-digit local number. The first three digits of the local number represent the *exchange code*, followed by the unique four-digit number which is the *subscriber number*.
+
+
+The format is usually represented as
+```
+(NXX)-NXX-XXXX
+```
+where `N` is any digit from 2 through 9 and `X` is any digit from 0 through 9.
+
+Your task is to clean up differently formated telephone numbers by removing punctuation and the country code (1) if present.
+
+For example, the inputs
+- `+1 (613)-995-0253`
+- `613-995-0253`
+- `1 613 995 0253`
+- `613.995.0253`
+
+should all produce the output
+
+`6139950253`
+
+**Note:** As this exercise only deals with telephone numbers used in NANP-countries, only 1 is considered a valid country code.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Event Manager by JumpstartLab [http://tutorials.jumpstartlab.com/projects/eventmanager.html](http://tutorials.jumpstartlab.com/projects/eventmanager.html)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/raindrops/README.md b/exercises/raindrops/README.md
new file mode 100644
index 0000000..ed1be21
--- /dev/null
+++ b/exercises/raindrops/README.md
@@ -0,0 +1,54 @@
+# Raindrops
+
+Convert a number to a string, the contents of which depend on the number's factors.
+
+- If the number has 3 as a factor, output 'Pling'.
+- If the number has 5 as a factor, output 'Plang'.
+- If the number has 7 as a factor, output 'Plong'.
+- If the number does not have 3, 5, or 7 as a factor,
+  just pass the number's digits straight through.
+
+## Examples
+
+- 28's factors are 1, 2, 4, **7**, 14, 28.
+  - In raindrop-speak, this would be a simple "Plong".
+- 30's factors are 1, 2, **3**, **5**, 6, 10, 15, 30.
+  - In raindrop-speak, this would be a "PlingPlang".
+- 34 has four factors: 1, 2, 17, and 34.
+  - In raindrop-speak, this would be "34".
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+A variation on a famous interview question intended to weed out potential candidates. [http://jumpstartlab.com](http://jumpstartlab.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/rna-transcription/README.md b/exercises/rna-transcription/README.md
new file mode 100644
index 0000000..68d1064
--- /dev/null
+++ b/exercises/rna-transcription/README.md
@@ -0,0 +1,55 @@
+# Rna Transcription
+
+Given a DNA strand, return its RNA complement (per RNA transcription).
+
+Both DNA and RNA strands are a sequence of nucleotides.
+
+The four nucleotides found in DNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and thymine (**T**).
+
+The four nucleotides found in RNA are adenine (**A**), cytosine (**C**),
+guanine (**G**) and uracil (**U**).
+
+Given a DNA strand, its transcribed RNA strand is formed by replacing
+each nucleotide with its complement:
+
+* `G` -> `C`
+* `C` -> `G`
+* `T` -> `A`
+* `A` -> `U`
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Rosalind [http://rosalind.info/problems/rna](http://rosalind.info/problems/rna)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/robot-simulator/README.md b/exercises/robot-simulator/README.md
new file mode 100644
index 0000000..b587984
--- /dev/null
+++ b/exercises/robot-simulator/README.md
@@ -0,0 +1,64 @@
+# Robot Simulator
+
+Write a robot simulator.
+
+A robot factory's test facility needs a program to verify robot movements.
+
+The robots have three possible movements:
+
+- turn right
+- turn left
+- advance
+
+Robots are placed on a hypothetical infinite grid, facing a particular
+direction (north, east, south, or west) at a set of {x,y} coordinates,
+e.g., {3,8}, with coordinates increasing to the north and east.
+
+The robot then receives a number of instructions, at which point the
+testing facility verifies the robot's new position, and in which
+direction it is pointing.
+
+- The letter-string "RAALAL" means:
+  - Turn right
+  - Advance twice
+  - Turn left
+  - Advance once
+  - Turn left yet again
+- Say a robot starts at {7, 3} facing north. Then running this stream
+  of instructions should leave it at {9, 4} facing west.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Inspired by an interview question at a famous company.
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/roman-numerals/README.md b/exercises/roman-numerals/README.md
new file mode 100644
index 0000000..8985dc0
--- /dev/null
+++ b/exercises/roman-numerals/README.md
@@ -0,0 +1,79 @@
+# Roman Numerals
+
+Write a function to convert from normal numbers to Roman Numerals.
+
+The Romans were a clever bunch. They conquered most of Europe and ruled
+it for hundreds of years. They invented concrete and straight roads and
+even bikinis. One thing they never discovered though was the number
+zero. This made writing and dating extensive histories of their exploits
+slightly more challenging, but the system of numbers they came up with
+is still in use today. For example the BBC uses Roman numerals to date
+their programmes.
+
+The Romans wrote numbers using letters - I, V, X, L, C, D, M. (notice
+these letters have lots of straight lines and are hence easy to hack
+into stone tablets).
+
+```
+ 1  => I
+10  => X
+ 7  => VII
+```
+
+There is no need to be able to convert numbers larger than about 3000.
+(The Romans themselves didn't tend to go any higher)
+
+Wikipedia says: Modern Roman numerals ... are written by expressing each
+digit separately starting with the left most digit and skipping any
+digit with a value of zero.
+
+To see this in practice, consider the example of 1990.
+
+In Roman numerals 1990 is MCMXC:
+
+1000=M
+900=CM
+90=XC
+
+2008 is written as MMVIII:
+
+2000=MM
+8=VIII
+
+See also: http://www.novaroma.org/via_romana/numbers.html
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+The Roman Numeral Kata [http://codingdojo.org/cgi-bin/index.pl?KataRomanNumerals](http://codingdojo.org/cgi-bin/index.pl?KataRomanNumerals)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/run-length-encoding/README.md b/exercises/run-length-encoding/README.md
new file mode 100644
index 0000000..c03a5cc
--- /dev/null
+++ b/exercises/run-length-encoding/README.md
@@ -0,0 +1,60 @@
+# Run Length Encoding
+
+Implement run-length encoding and decoding.
+
+Run-length encoding (RLE) is a simple form of data compression, where runs
+(consecutive data elements) are replaced by just one data value and count.
+
+For example we can represent the original 53 characters with only 13.
+
+```
+"WWWWWWWWWWWWBWWWWWWWWWWWWBBBWWWWWWWWWWWWWWWWWWWWWWWWB"  ->  "12WB12W3B24WB"
+```
+
+RLE allows the original data to be perfectly reconstructed from
+the compressed data, which makes it a lossless data compression.
+
+```
+"AABCCCDEEEE"  ->  "2AB3CD4E"  ->  "AABCCCDEEEE"
+```
+
+For simplicity, you can assume that the unencoded string will only contain
+the letters A through Z (either lower or upper case) and whitespace. This way 
+data to be encoded will never contain any numbers and numbers inside data to 
+be decoded always represent the count for the following character.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Wikipedia [https://en.wikipedia.org/wiki/Run-length_encoding](https://en.wikipedia.org/wiki/Run-length_encoding)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/say/README.md b/exercises/say/README.md
new file mode 100644
index 0000000..d088322
--- /dev/null
+++ b/exercises/say/README.md
@@ -0,0 +1,99 @@
+# Say
+
+Given a number from 0 to 999,999,999,999, spell out that number in English.
+
+## Step 1
+
+Handle the basic case of 0 through 99.
+
+If the input to the program is `22`, then the output should be
+`'twenty-two'`.
+
+Your program should complain loudly if given a number outside the
+blessed range.
+
+Some good test cases for this program are:
+
+- 0
+- 14
+- 50
+- 98
+- -1
+- 100
+
+### Extension
+
+If you're on a Mac, shell out to Mac OS X's `say` program to talk out
+loud.
+
+## Step 2
+
+Implement breaking a number up into chunks of thousands.
+
+So `1234567890` should yield a list like 1, 234, 567, and 890, while the
+far simpler `1000` should yield just 1 and 0.
+
+The program must also report any values that are out of range.
+
+## Step 3
+
+Now handle inserting the appropriate scale word between those chunks.
+
+So `1234567890` should yield `'1 billion 234 million 567 thousand 890'`
+
+The program must also report any values that are out of range.  It's
+fine to stop at "trillion".
+
+## Step 4
+
+Put it all together to get nothing but plain English.
+
+`12345` should give `twelve thousand three hundred forty-five`.
+
+The program must also report any values that are out of range.
+
+### Extensions
+
+Use _and_ (correctly) when spelling out the number in English:
+
+- 14 becomes "fourteen".
+- 100 becomes "one hundred".
+- 120 becomes "one hundred and twenty".
+- 1002 becomes "one thousand and two".
+- 1323 becomes "one thousand three hundred and twenty-three".
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+A variation on JavaRanch CattleDrive, exercise 4a [http://www.javaranch.com/say.jsp](http://www.javaranch.com/say.jsp)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/scrabble-score/README.md b/exercises/scrabble-score/README.md
new file mode 100644
index 0000000..5207d59
--- /dev/null
+++ b/exercises/scrabble-score/README.md
@@ -0,0 +1,74 @@
+# Scrabble Score
+
+Given a word, compute the scrabble score for that word.
+
+## Letter Values
+
+You'll need these:
+
+```plain
+Letter                           Value
+A, E, I, O, U, L, N, R, S, T       1
+D, G                               2
+B, C, M, P                         3
+F, H, V, W, Y                      4
+K                                  5
+J, X                               8
+Q, Z                               10
+```
+
+## Examples
+"cabbage" should be scored as worth 14 points:
+
+- 3 points for C
+- 1 point for A, twice
+- 3 points for B, twice
+- 2 points for G
+- 1 point for E
+
+And to total:
+
+- `3 + 2*1 + 2*3 + 2 + 1`
+- = `3 + 2 + 6 + 3`
+- = `5 + 9`
+- = 14
+
+## Extensions
+- You can play a double or a triple letter.
+- You can play a double or a triple word.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Inspired by the Extreme Startup game [https://github.com/rchatley/extreme_startup](https://github.com/rchatley/extreme_startup)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/series/README.md b/exercises/series/README.md
new file mode 100644
index 0000000..941569b
--- /dev/null
+++ b/exercises/series/README.md
@@ -0,0 +1,57 @@
+# Series
+
+Given a string of digits, output all the contiguous substrings of length `n` in
+that string.
+
+For example, the string "49142" has the following 3-digit series:
+
+- 491
+- 914
+- 142
+
+And the following 4-digit series:
+
+- 4914
+- 9142
+
+And if you ask for a 6-digit series from a 5-digit string, you deserve
+whatever you get.
+
+Note that these series are only required to occupy *adjacent positions*
+in the input; the digits need not be *numerically consecutive*.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+A subset of the Problem 8 at Project Euler [http://projecteuler.net/problem=8](http://projecteuler.net/problem=8)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/space-age/README.md b/exercises/space-age/README.md
new file mode 100644
index 0000000..52f0cf2
--- /dev/null
+++ b/exercises/space-age/README.md
@@ -0,0 +1,54 @@
+# Space Age
+
+Given an age in seconds, calculate how old someone would be on:
+
+   - Earth: orbital period 365.25 Earth days, or 31557600 seconds
+   - Mercury: orbital period 0.2408467 Earth years
+   - Venus: orbital period 0.61519726 Earth years
+   - Mars: orbital period 1.8808158 Earth years
+   - Jupiter: orbital period 11.862615 Earth years
+   - Saturn: orbital period 29.447498 Earth years
+   - Uranus: orbital period 84.016846 Earth years
+   - Neptune: orbital period 164.79132 Earth years
+
+So if you were told someone were 1,000,000,000 seconds old, you should
+be able to say that they're 31 Earth-years old.
+
+If you're wondering why Pluto didn't make the cut, go watch [this
+youtube video](http://www.youtube.com/watch?v=Z_2gbGXzFbs).
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Partially inspired by Chapter 1 in Chris Pine's online Learn to Program tutorial. [http://pine.fm/LearnToProgram/?Chapter=01](http://pine.fm/LearnToProgram/?Chapter=01)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/strain/README.md b/exercises/strain/README.md
new file mode 100644
index 0000000..44b5acb
--- /dev/null
+++ b/exercises/strain/README.md
@@ -0,0 +1,70 @@
+# Strain
+
+Implement the `keep` and `discard` operation on collections. Given a collection
+and a predicate on the collection's elements, `keep` returns a new collection
+containing those elements where the predicate is true, while `discard` returns
+a new collection containing those elements where the predicate is false.
+
+For example, given the collection of numbers:
+
+- 1, 2, 3, 4, 5
+
+And the predicate:
+
+- is the number even?
+
+Then your keep operation should produce:
+
+- 2, 4
+
+While your discard operation should produce:
+
+- 1, 3, 5
+
+Note that the union of keep and discard is all the elements.
+
+The functions may be called `keep` and `discard`, or they may need different
+names in order to not clash with existing functions or concepts in your
+language.
+
+## Restrictions
+
+Keep your hands off that filter/reject/whatchamacallit functionality
+provided by your standard library!  Solve this one yourself using other
+basic tools instead.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+Conversation with James Edward Gray II [https://twitter.com/jeg2](https://twitter.com/jeg2)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/sublist/README.md b/exercises/sublist/README.md
new file mode 100644
index 0000000..39c77af
--- /dev/null
+++ b/exercises/sublist/README.md
@@ -0,0 +1,51 @@
+# Sublist
+
+Given two lists determine if the first list is contained within the second
+list, if the second list is contained within the first list, if both lists are
+contained within each other or if none of these are true.
+
+Specifically, a list A is a sublist of list B if by dropping 0 or more elements
+from the front of B and 0 or more elements from the back of B you get a list
+that's completely equal to A.
+
+Examples:
+
+ * A = [1, 2, 3], B = [1, 2, 3, 4, 5], A is a sublist of B
+ * A = [3, 4, 5], B = [1, 2, 3, 4, 5], A is a sublist of B
+ * A = [3, 4], B = [1, 2, 3, 4, 5], A is a sublist of B
+ * A = [1, 2, 3], B = [1, 2, 3], A is equal to B
+ * A = [1, 2, 3, 4, 5], B = [2, 3, 4], A is a superlist of B
+ * A = [1, 2, 4], B = [1, 2, 3, 4, 5], A is not a superlist of, sublist of or equal to B
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/sum-of-multiples/README.md b/exercises/sum-of-multiples/README.md
new file mode 100644
index 0000000..f011578
--- /dev/null
+++ b/exercises/sum-of-multiples/README.md
@@ -0,0 +1,48 @@
+# Sum Of Multiples
+
+Given a number, find the sum of all the multiples of particular numbers up to
+but not including that number.
+
+If we list all the natural numbers up to but not including 20 that are
+multiples of either 3 or 5, we get 3, 5, 6 and 9, 10, 12, 15, and 18.
+
+The sum of these multiples is 78.
+
+Given a number, find the sum of the multiples of a given set of numbers,
+up to but not including that number.
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+A variation on Problem 1 at Project Euler [http://projecteuler.net/problem=1](http://projecteuler.net/problem=1)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/triangle/README.md b/exercises/triangle/README.md
new file mode 100644
index 0000000..0685231
--- /dev/null
+++ b/exercises/triangle/README.md
@@ -0,0 +1,56 @@
+# Triangle
+
+Determine if a triangle is equilateral, isosceles, or scalene.
+
+An _equilateral_ triangle has all three sides the same length.<br/>
+An _isosceles_ triangle has at least two sides the same length. (It is sometimes
+specified as having exactly two sides the same length, but for the purposes of
+this exercise we'll say at least two.)<br/>
+A _scalene_ triangle has all sides of different lengths.
+
+## Note
+
+For a shape to be a triangle at all, all sides have to be of length > 0, and 
+the sum of the lengths of any two sides must be greater than or equal to the 
+length of the third side. See [Triangle Inequality](https://en.wikipedia.org/wiki/Triangle_inequality).
+
+## Dig Deeper
+
+The case where the sum of the lengths of two sides _equals_ that of the 
+third is known as a _degenerate_ triangle - it has zero area and looks like 
+a single line. Feel free to add your own code/tests to check for degenerate triangles.
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+The Ruby Koans triangle project, parts 1 & 2 [http://rubykoans.com](http://rubykoans.com)
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.
diff --git a/exercises/word-count/README.md b/exercises/word-count/README.md
new file mode 100644
index 0000000..1e0f2ed
--- /dev/null
+++ b/exercises/word-count/README.md
@@ -0,0 +1,49 @@
+# Word Count
+
+Given a phrase, count the occurrences of each word in that phrase.
+
+For example for the input `"olly olly in come free"`
+
+```plain
+olly: 2
+in: 1
+come: 1
+free: 1
+```
+
+
+## Elm Installation
+
+Refer to the [Exercism help page](http://exercism.io/languages/elm) for Elm
+installation and learning resources.
+
+## Writing the Code
+
+The first time you start an exercise, you'll need to ensure you have the
+appropriate dependencies installed.
+
+```bash
+$ npm install
+```
+
+Execute the tests with:
+
+```bash
+$ npm test
+```
+
+Automatically run tests again when you save changes:
+
+```bash
+$ npm run watch
+```
+
+As you work your way through the test suite, be sure to remove the `skip <|`
+calls from each test until you get them all passing!
+
+## Source
+
+This is a classic toy problem, but we were reminded of it by seeing it in the Go Tour.
+
+## Submitting Incomplete Solutions
+It's possible to submit an incomplete solution so you can see how others have completed the exercise.