openscad/fit_test.scad

mirror of https://github.com/correl/openscad.git synced 2024-11-14 19:19:34 +00:00
use <project_box.scad>
$fn=50;

mode = "case"; // ["case", "lid", "all"]

project_box([50, 70, 1],
            below=1,
            mode=mode);
Initial commit 2022-12-06 15:58:59 +00:00			`use <project_box.scad>`
			`$fn=50;`

[project_box] Add lid 2022-12-06 21:19:45 +00:00			`mode = "case"; // ["case", "lid", "all"]`

[project_box] Use 1mm clearance for fit test Clearance must be at least 1mm to provide for the locking nubs. 2022-12-07 17:54:54 +00:00			`project_box([50, 70, 1],`
[project_box] Add lid 2022-12-06 21:19:45 +00:00			`below=1,`
			`mode=mode);`