19 lines
1.8 KiB
Org Mode
19 lines
1.8 KiB
Org Mode
:PROPERTIES:
|
|
:ID: d97fde4a-0e91-40f9-ac57-d0cd67295d14
|
|
:END:
|
|
#+title: ESP8266
|
|
* Best pins to use
|
|
| Label | GPIO | Input | Output | Notes |
|
|
|-------+--------+---------------+-----------------------+------------------------------------------------------------------|
|
|
| D0 | GPIO16 | no interrupt | no PWM or I2C support | HIGH at boot used to wake up from deep sleep |
|
|
| D1 | GPIO5 | OK! | OK! | often used as SCL (I2C) |
|
|
| D2 | GPIO4 | OK! | OK! | often used as SDA (I2C) |
|
|
| D3 | GPIO0 | pulled up | OK! | connected to FLASH button, boot fails if pulled LOW |
|
|
| D4 | GPIO2 | pulled up | OK! | HIGH at boot connected to on-board LED, boot fails if pulled LOW |
|
|
| D5 | GPIO14 | OK! | OK! | SPI (SCLK) |
|
|
| D6 | GPIO12 | OK! | OK! | SPI (MISO) |
|
|
| D7 | GPIO13 | OK! | OK! | SPI (MOSI) |
|
|
| D8 | GPIO15 | pulled to GND | OK | SPI (CS) Boot fails if pulled HIGH |
|
|
| RX | GPIO3 | OK | RX pin | HIGH at boot |
|
|
| TX | GPIO1 | TX pin | OK | HIGH at boot debug output at boot, boot fails if pulled LOW |
|
|
| A0 | ADC0 | Analog Input | X | |
|