7b3ccb9365
Add keyboard usb-c connector housing
...
For a Ducky Shine 6 keyboard, replaces the housing used for the factory
USB Micro-B connector. Accommodates a 9mm x 14mm JRC-B008 USB-C breakout
board.
2023-03-18 00:56:09 -04:00
9be72f43c4
Add kitchen scrap bin
2023-02-04 16:14:43 -05:00
87afaac552
[garage_door] Use correct measurements and cutouts
2022-12-07 17:03:29 -05:00
81a299ce0a
[project_box] Fix lid-only cutouts
...
Adjust translations to line things up at the proper heights when
rendering the lid alone.
2022-12-07 17:02:50 -05:00
2b63263b60
[project_box] Offset lid cutouts
...
The lid is offset by the wall width and the fit tolerance of the
internal project area, as it begins at the front wall and ends over the
lip of the back wall.
2022-12-07 16:16:03 -05:00
ca93d31f34
[project_box] Update README
2022-12-07 13:31:15 -05:00
bea6302732
[project_box] Use 1mm clearance for fit test
...
Clearance must be at least 1mm to provide for the locking nubs.
2022-12-07 12:54:54 -05:00
63b7d76b17
[project_box] Fix dimensions and cutouts
...
Carefully apply internal and external dimensions to translations, and
update the cutouts to apply directly to the surfaces they're cutting
through.
2022-12-07 12:43:59 -05:00
4fabdf070d
[project_box] Clean up dimensions API
...
Use coordinate triples to represent the 3D volumes being built upon.
2022-12-07 12:09:05 -05:00
a01323641b
[project_box] Add support for cutouts
2022-12-07 11:40:20 -05:00
b1af6c8e0f
[project_box] Improve the pull-out handle
2022-12-06 19:16:34 -05:00
f3ba84e9e6
[project_box] Add pull handle to lid
2022-12-06 18:34:30 -05:00
635e1a98ae
[project_box] Add lid
2022-12-06 16:19:45 -05:00
7cd13f0eb2
[project_box] Fix locking nub size
2022-12-06 15:16:28 -05:00
66cb2f6c19
[project_box] Clean up model
2022-12-06 15:10:11 -05:00
60bac0c35b
[project_box] Add lid slot
2022-12-06 14:59:31 -05:00
84c7b05298
Add readme
2022-12-06 11:08:20 -05:00
672995835a
Initial commit
2022-12-06 10:58:59 -05:00
