mirror of
https://github.com/correl/openscad.git
synced 2024-11-14 19:19:34 +00:00
56 lines
2 KiB
Org Mode
56 lines
2 KiB
Org Mode
#+title: OpenSCAD Models
|
|
#+options: toc:nil
|
|
|
|
My collection of 3D-printable models designed using [[https://openscad.org/][OpenSCAD]].
|
|
|
|
* [[file:project_box.scad][Project Box]]
|
|
A parametric box for electronics projects using perforated circuit boards. The
|
|
board is held above the bottom of the box by four corner supports, and snaps
|
|
into place to hold it snugly while allowing easy removal.
|
|
|
|
#+caption: Generating a project box for a 5x7cm board with front and back cutouts.
|
|
#+begin_src scad :file project-box.png :eval no-export :exports both
|
|
use <correl/project_box.scad>
|
|
$fn=50;
|
|
|
|
mode = "case"; // ["case", "lid", "all"]
|
|
box = [50, // Board width
|
|
70, // Board length
|
|
20]; // Project height
|
|
|
|
rotate([0,0,180])
|
|
project_box(box,
|
|
below=10,
|
|
mode=mode) {
|
|
cutout_front(box)
|
|
translate([10, 5, 0])
|
|
square([15,10]);
|
|
cutout_back(box)
|
|
translate([10, 5, 0])
|
|
circle(5);
|
|
}
|
|
#+end_src
|
|
|
|
#+RESULTS:
|
|
[[file:project-box.png]]
|
|
|
|
* [[file:ducky-shine-6-usbc.scad][Ducky Shine 6 USB-C Connector Housing]]
|
|
A replacement housing for the USB connector in a [[https://www.duckychannel.com.tw/en/Ducky-Shine6][Ducky Shine 6 keyboard]] that
|
|
secures the connector and its wiring within the keyboard's case. The keyboard
|
|
originally ships with a USB Micro-B connector suspended in a solid connector
|
|
with the same profile. This makes it impossible to re-use the existing housing,
|
|
so this one is modeled to fit the cable along with a compact JRC-B008 USB-C
|
|
breakout board and screw into place. The model is divided into top and bottom
|
|
pieces that can be glued together once the board is in place and soldered.
|
|
|
|
#+CAPTION: The full model, with top and bottom parts connected.
|
|
[[file:ducky-shine-6-usbc.png]]
|
|
|
|
#+CAPTION: A JRC-B008 USB-C breakout board
|
|
[[file:51diC44ScpL._AC_SX466_.jpg]]
|
|
|
|
#+CAPTION: The original USB Micro-B connector and housing.
|
|
[[file:PXL_20230317_205351346.jpg]]
|
|
|
|
#+CAPTION: The new housing with a USB-C connector, printed in green PLA+.
|
|
[[file:PXL_20230318_044352351.jpg]]
|